Applies to: All Reolink IP cameras( Reolink E1 pro and E1 zoom included) except for battery-powered cameras and B800/D800/B400/D400/E1/ Reolink Lumus.
If your Reolink camera supports the RTSP command, then you may upload live view of the camera to YouTube referring to the below video and the steps.
Here is a video for your reference:
Steps 1. Set up the camera to connect to the Internet (You may test this point by checking whether the camera could be accessed remotely).
Step 2. Build the RTSP/RTMP URL of your IP cameras
The format of RTSP/RTMP address is as below:
rtsp://(user name):(password)@(IP address):554/h264Preview_01_(stream type)
rtmp://(ip address)/bcs/channel(channel id)_main.bcs?channel=(channel id)&stream=0&user=(user name)&password=(user password)
For example, if your camera or NVR has the following information,
IP address: 192.168.10.92
username: admin
password: 111111
then the RTSP URL will be:
Main Stream: rtsp://admin:111111@192.168.10.92:554/h264Preview_01_main
Sub Stream: rtsp://admin:111111@192.168.10.92:554/h264Preview_01_sub
The RTMP URL will be:
Main Stream: rtmp://192.168.10.92/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&
password=111111
Sub Stream: rtmp://192.168.10.92/bcs/channel0_sub.bcs?channel=0&stream=1&user=admin&
password=111111
For more details, please refer to Request for RTSP URL
Step 3. Upload the live view to YouTube referring to this website: https://reolink.com/stream-ip-camera-to-youtube/
If you meet any problems in this process, please contact support for help.
Disclaimer:
Reolink is not liable for any content or user submissions or otherwise use the service in a manner that:
(1) infringes or violates the intellectual property rights or proprietary rights, rights of publicity or privacy, or other rights of any third party
(2) violates any law, statute, ordinance or regulation
See more at https://reolink.com/terms-conditions/