How to Add Your Reolink NVR Remotely via UID

Applies to: All Reolink NVRs

Before the setup, please ensure that your device is connected to the Internet and the UDP ports are open.

Step 1. Connect your NVR to the LAN port of your router with an Ethernet cable.

Step 2. Go to Menu -> Network -> Advanced, check UID enable and click Apply to save.

Step 3. Enter the UID and password to log into your NVR via Reolink software. Refer to:

• Add Reolink Products via Reolink App
• Add Reolink Products on the WAN via Reolink Client