Applies to: All Reolink battery-powered cameras except for Argus, Go series cameras

This article introduces the bandwidth required for LiveView, cloud uploading, email notifications and push notifications.

1. Bandwidth for LiveView

Note: The bandwidth of Reolink battery-powered cameras depends on the Steam type you choose/set.

If you set Clear Type, then the bandwidth is the same with the Bitrate under clear mode.
If you set Fluent Type, then the bandwidth is the same with the Bitrate under fluent mode.

In Clear mode: the maximum Bitrate is 2048 kbps

In Fluent mode: the maximum Bitrate is 512 kbps

​You may change the bitrate and set the stream mode to view the cameras.

 

2. Bandwidth for cloud uploading:

In Clear mode: the maximum Bitrate is 2048 kbps

In Fluent mode: the maximum Bitrate is 512 kbps

You may set up the upload video resolution according to your needs.

 

3. Bandwidth for email notifications:

With picture attached: 250kbps

Without picture attached: 2kbps

You may set up the email attachment here.

 

4. Bandwidth for push notifications

Bandwidth for push notifications can be ignored, as the push file is very small (less than 1KB) so it takes up a very small amount of bandwidth.

 

If you have the camera upload clear video(maximum bitrate) to Reolink cloud, view clear video (maximum bitrate) on Reolink App at the same time and have enabled the email notification with a picture attached, then the total bandwidth needs to be: 2048+2048+250=4346 kbps